Shure GLX-D Guia Del Usuario página 4

Ocultar thumbs Ver también para GLX-D:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 38
GLXD4 Receiver Controls and Connectors
rf
group
link
channel
① Antenna
Two antennas per receiver. Antennas pick up the signal from the
transmitter.
② RF Status LED
• ON = Linked transmitter is on
• Flashing = Searching for transmitter
• OFF = Linked transmitter off or transmitter unlinked
③ Group Button
Press and hold for two seconds to enable manual group edit.
④ Link Button
Press to manually link receiver to a transmitter or to activate the
remote ID function
⑤ Channel
• Momentary press to start a channel scan
• Press and hold 2 seconds to enable manual channel edit
⑥ LCD Screen
Displays receiver and transmitter status.
⑦ Gain Buttons
Press to increase or decrease transmitter gain in 1 dB increments.
Receiver Screen
① Group
Displays the selected group.
② Channel
Displays the selected channel.
③ Transmitter Battery Runtime
Displays remaining battery life in hours and minutes.
Alternatively displays the following battery status:
• CALC = battery life calculation
• Lo = battery life less than 15 minutes
• Err = replace battery
④ Audio Meter
Indicates audio signal level and peaks.
⑤ Gain
Displays transmitter gain settings (dB).
⑥ OL Indicator
Indicates audio overload, reduce gain.
4
GLXD4
+
gain
-
Front Panel
off / on
power
10
11
⑧ Battery Charging Indicator
Illuminates when battery is in charging bay:
• Red = battery charging
• Green Flashing = battery charge > 90%
• Green = battery charged
• Amber Flashing = charging error, replace battery
⑨ Battery Charging Bay
Charges transmitter battery while receiver is powered.
⑩ Power Switch
Powers the unit on and off.
⑪ Power Supply Jack
Connect the supplied 15 V DC external power supply.
⑫ Mic Out
XLR microphone output jack supplies microphone-level audio output.
⑬ USB Port
For uploading firmware updates
⑭ Instr Out
TRS ¼" (6.35mm) audio output. Connect to mixers, recorders, and
amplifiers.
auto
⑦ Transmitter Locked
Displayed when linked transmitter controls are locked.
⑧ Scanning
Indicates a scan is in progress.
⑨ Auto
Indicates that the selected group has backup channels available.
mic out
instr out
12
13 14
Rear Panel

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Glxd4Legendary performance glxd4

Tabla de contenido