Adjusting Kombimotor For User; Using With Stihl Ar Battery - Stihl KMA 130 R Manual De Instrucciones

English
1 2
► Insert nuts (2) in the barrier bar (1) so that the holes line
up.
► Fit the clamp (5) in the loop handle (3).
► Place the loop handle (3) with clamp (5) and barrier bar (4)
on the drive tube (6).
► Hold the clamp (7) against the drive tube (6).
► Insert and tighten down the screws (8) firmly.

7 Adjusting KombiMotor for User

7.1

Using with STIHL AR Battery

7.1.1 Fitting and Adjusting the Connecting Cable
The connecting cable can be fitted and adjusted to suit the
user's size and the application.
1
2
2
2
36
3 4
5
6
7
8
2
2
2
The connecting cable can be secured in position by the
guide (1) on the harness and the fasteners (2), or on the side
of the backplate with the fasteners (2).
3
The length of the connecting cable can be adjusted by
making a loop on the backplate (3) or at one side (4).
► Arrange the connecting cable so that it is as short as
possible without hindering your work.
7.1.2 Fitting and Adjusting the Carrying System
► Put the battery on your back.
► Close buckle (2) on the waist belt.
► Close buckle (1) on the chest strap.
7 Adjusting KombiMotor for User
4
1
0458-805-9821-B