Troubleshooting; Table: Malfunctions And Possible Causes - Amibot Spirit ICE Manual De Usuario

EN

Troubleshooting

Please contact AMIBOT technical department in the following cases:
• If the appliance has been dropped, damaged or come into
contact with water.
• If the power cable is damaged.
• If the battery is defective.

Table: Malfunctions and possible causes

To avoid breakdowns/malfunctioning, regularly check and clean the
appliance accessories.
No. Malfunction Cause
1. The appliance is
The appliance not switched on.
01 does not switch
2. The appliance
on. has run out of
battery.
1. The floor is wet.
2. The dust bin is
The robot does not attached
02 not move cor- correctly.
rectly 3. The central brush
is not inserted
correctly.
Solution
1. Switch the power button to
ON.
2. Charge the robot using its
home base or plug it in to
the power cable.
1. Dry the floor.
2. Remove and reinsert the
dust bin.
3. Remove and reinsert the
brush in its cavity.
28
Troubleshooting
1. The dust bin is
full.
Appliance 2. The central
03
suction lost brush or the
side brushes are
blocked.
The appliance
1. The wheels are
04 is hard to
jammed.
manoeuvre.
1. The batteries
are not inserted
The remote
or need to be
05 control does
replaced.
not work
2. The remote
control is broken.
If none of the above-mentioned steps provide a solution for your
problem, please contact the AMIBOT after-sales department.
EN
1. Empty the dust bin, clean
the motor and the filters.
2. Remove any hair and
debris from the brushes.
Check that there is no dirt
obstructing the robot.
1. Clean the vacuum wheels
and remove the hair and
other debris caught up
around them.
1. Change the batteries.
2. Replace the remote control
for a new one.
29