Troubleshooting; Table: Malfunctions And Possible Causes - Amibot Swip AS50 EVERYBOT Manual Del Usuario

Troubleshooting

Please contact AMIBOT technical department in the following cases:
• If the appliance has been dropped, damaged or come into contact
with water or another liquid.
• If the power cable is damaged.
• If the battery is defective.

Table: Malfunctions and possible causes

To avoid breakdowns/malfunctioning, regularly check and clean the
appliance accessories.
No Malfunction
The appliance
01 does not switch
on.
Cause
1. The appliance is not
switched on.
2. The appliance has
run out of battery.
17
Solution
1. Switch the power
button to ON "I" to
turn it on.
2. Charge the robot
using the power cable.
EN