Troubleshooting; Table: Malfunctions And Possible Causes - Amibot aNIMAL xl Manual De Usuario

EN

Troubleshooting

Please contact AMIBOT technical department in the following cases:
• If the appliance has been dropped, damaged or come into
contact with water.
• If the power cable is damaged.
• If the battery is defective.
Tables: Malfunctions and possible causes
When the robot encounters a problem, an error code appears on
the screen.
No. Beeps Code
01 1 E11
02 1 E12
03 1 E13
04 1 E14
05 2 E21
06 2 E22
Cause
Problem with the left
wheel.
Problem with the
right wheel.
Problem with the left
side brush.
Problem with the
right side brush.
The robot no longer
touches the floor.
Problem with the gap
sensors.
34
Solution
Check the left wheel.
Check the right wheel.
Check the left side brush.
Check the right side brush.
Place the robot in a safe place
on a flat area and restart a
cleaning cycle.
Clean the gap sensors using a
soft cloth.