Data Communication; Care & Maintenance - Kostal PIKO 1.5 MP Manual De Instrucciones

Short Manual
3.11. Example: Numerical and graphical display of the monthly yields
The following data is stored in the inverter:
Event messages with date

Energy yields on a daily, monthly and annual basis

Energy yield data
10-minute values
Daily values
Monthly values
Annual values
Total yield
3.12.

Data communication

The inverter can issue a large amount of data concerning the data interfaces RS485 (e.g. data
logger) and LAN (e.g. PIKO Solar Portal) for purposes of data evaluation. Several inverters can be
connected with the RS485 bus. You can find further information concerning the PIKO Solar Portal
in the detailed operating instructions at our homepage.
3.13. Care/Maintenance
Remove dust with compressed air (max. 2 bar).

Remove soiling with a slightly damp cloth (clear water or a 2% hard soap solution).

06/2016 | DOC01666746 | KOSTAL Short Manual PIKO 1.5 - 4.2 MP
The status display is shown.
1. Press SET. The main menu is displayed with Yield
selected.
2. Press SET. A list of yield periods (Day, Month, Year) is
displayed.
3. Press  to select a yield period.
4. Press SET. The individual yields for the yield period are
shown in a list (Fig. left).
5. Press  to select an individual yield.
6. Press SET. The selected individual yield is shown in a
chart
(Fig. left).
7. Press  to page through the charts.
8. Press SET to return to the list.
9. Yields can also be displayed as monetary values
(remuneration) (see menu structure).
Storage resolution/period
31 days
13 months
30 years
30 years
Permanent
DE
DA
EN
ES
FR
GR
IT
NL
PL
PT
TR
TR
27