Replacing Agitator; Cleaning Agitator - Panasonic MC-UG471 Instrucciones De Operación

Base Plate
Belt Guard
Base Plate Belt Guard
Protector de la correa
de la placa de la base

Replacing Agitator

➢ ➢ Turn the vacuum cleaner over to
➢ ➢ When brushes are worn to the level of
➢ ➢ Remove lower plate and agitator.
➢ ➢ Position belt over belt pulley on the
➢ ➢ Reinstall agitator and lower plate.

Cleaning Agitator

➢ ➢ Clean agitator after every five uses
➢ ➢ Remove lower plate.
➢ ➢ Cut off any carpet pile and lint
➢ ➢ Remove agitator.
➢ ➢ Remove any string or debris located
➢ ➢ Reinstall agitator and lower plate.
- 36 -
check for worn brushes.
the base belt guard, replace the
agitator.
new agitator.
and every time the belt is replaced.
entangled around agitator with a pair
of scissors.
on the end caps.