Function Of Each Component - Samsung SCC-B5201 Guia Del Usuario

3. Function of Each Component

I
Fixed focus lens
• Fixed focus lens installed on the camera.
Please take cautions that any dust or foreign matter gathers on the
front glass surface of the lens.
I
Main body
• A body that supports the camera.
I
PCB board
• This part is quite important since it performs the camera function.
Please handle with care.
I
Power cable
• The terminal that is connected to the power (adaptor) cable.
Connect to DC 12V.
I
Video signal output cable
• The cable that sends the video signal.
I
Dome cover
• The transparent plastic cover that protects the camera.
Be careful not to make a scratch on it.
4
User Guide
I
Function Switch
Function switch located at the rear side of the camera within the dome
cover. Sets the White Balance mode.
I
ATW (Auto Tracing White Balance
Automatically adjusts the color temperature of the screen (within 2500-
9500 color temperature range) according to the temperature change in
external environments.
I
AWC (Auto White Balance Control)
Adjusts the color temperature to the color temperature stored when
switched to AWC.
User Guide
5
E