Sanus VLT16 Manual De Instrucciones página 12

STEP 2 Attach Wall Plate -
CAUTION:
Avoid potential personal injuries and property damage!
●
Mount the wall plate directly onto the concrete surface
●
Minimum solid concrete thickness: 203 mm (8 in.)
●
Minimum concrete block size: 203 x 203 x 406 mm (8 x 8 x 16 in.)
●
Minimum horizontal space between fasteners: 203 mm (8 in.)
1. Level the wall plate
14
NOTE: For assistance in determining wall plate location, see HeightFinder at sanus.com.
2. Remove the wall plate
IMPORTANT: Pilot holes must be drilled to a depth of 75 mm (3 in.), using a 10 mm (3/8 in.) diameter drill bit.
1
12
Solid Concrete or Concrete Block Option
and mark three hole locations.
and drill pilot holes into concrete. Never drill into the mortar between blocks.
14
2
14
75 mm
(3 in.)
10 mm
(3/8 in.)