Troubleshooting & Faq - GN Netcom Jabra BT530 Manual Del Usuario

Transfer the call to the headset
- t ap the answer/end button to transfer the call from the office
phone to the headset via the Jabra bluetooth hub .
the answering of a call from the office phone requires a hook lifter
in order to have the Jabra bt530 answer the call automatically .
TroubleshooTing & faQ
I hear crackling noises
- bluetooth is a radio technology, which means it is sensitive to
objects between the headset and the connected device . It is
designed for the headset and the connected device to be used
within 10 meters (33 feet) of each other, with no major objects
in the way (walls, etc .) .
I cannot hear anything in my headset
- Increase the volume in the headset .
- ensure that the headset is paired to a device that is playing .
- make sure your phone is connected to the headset by tapping
the answer/end button .
I am having pairing problems
- you may have deleted your headset pairing connection in your
mobile phone . follow the pairing instructions .
I want to reset the headset
- It is possible to reset and test the headset by 'pressing and
holding' all three buttoms at the same time . the red, blue
and green light will light up in a white light . In this mode, the
pairing list is reset, and you can test if the headset works as you
will be able to hear audio in the speaker from the microphone .
- the headset will automatically turn off after approx . 10 seconds .
the next time you power on, the headset will go into pairing
mode as the first time you powered your new bt530 on .
Will the Jabra BT530 work with other Bluetooth equipment?
- the Jabra bt530 is designed to work with bluetooth mobile
phones . It can also work with other bluetooth devices that are
compliant with bluetooth version 1 .1 or higher and support a
headset, hands-free and/or advance audio distribution profile .
Jabra bt530
10