Lcd Display - koban KMD 02 Manual Del Usuario

KMD 02
Digital multimeter

LCD display

See Table 1 indicated for information about the LCD display.
The battery is low.
Warning: to avoid false readings, which could lead to possible
electric shock or personal injury, replace the battery as soon as
the battery indicator appears.
Indicates negative readings.
Indicator for AC voltage or current. AC voltage and current are
displayed as the average of the absolute value of the input,
calibrated to indicate the equivalent rms value of sine wave.
Indicator for DC voltage or current.
The Meter is in diode test mode
The Meter is in the Continuity Check mode.
The Meter is in the Data Hold mode.
ºC: Celsius scale. The unit of temperature.
ªF: Fahrenheit scale.
V: Volts. The unit of voltage.
mV: milivolt. 1x10
A: Amperes (amps). The unit of current.
mA: Miliamp. 1x10
A: Microamp. 1x10
Instructions manual | 28
Figure 1. Display
Table 1. Display Symbols
or 0.001 volts.
-3
or 0.001 amperes.
-3
or 0.000001 amperes.
-6
www.grupotemper.com