Accessories; Function Description; General Functions; Data Hold Mode - koban KMD 02 Manual Del Usuario

KMD 02
Digital multimeter

Accessories

Delivered with the multimeter:
User´s manual
Test leads
"K"type bead
Thermocouple
Special multi-function socket

Function description

General functions

Data hold mode

Data Hold mode makes the meter
stop updating the display. Data
Hold function can be cancelled by
changing the measurement mode, or
push HOLD key again.
To enter and exit the Data Hold
mode:
1. Press HOLD key. Fixes the display
on the current value,
displayed.
2. A second short press returns the
meter to normal mode.

Battery Saver

Turn on the meter. And then the
Meter will be turned off automatic
after approx. 15 minutes.

Non Contact AC Voltage detection

Hold the Meter so that the Meter's
top is vertically and horizontally
centered and contacting the
Instructions manual | 30
One piece
One piece
One piece
One piece
conductor, when the live voltage >
11OV{RMS), the sensing indicator
will be on.
Note:
4. Even without LEO indication, the
voltage may still exist. Do not rely
on non-contact voltage detector
to determine the presence of
voltage wire, Detection operation
may be subject to socket design,
insulation thickness and different
type and other factors
5. When the meter input terminals
is
presence voltage, due to the
influence of presenced voltage,
voltage sensing indicator may also
be bright.
6. Keep the meter away from
electrical noise sources during
the tests, i.e,florescent lights,
dimmable lights, motors, etc. These
sources can trigger NON-Contact
AC Voltage Detection Function and
invalidate the test.
www.grupotemper.com