Keypad; Terminals - koban KMD 02 Manual Del Usuario

Ω: Ohm. The unit of resistance.
kΩ: Kilohm. 1x10
MΩ: Megohm. 1x10
KHz: Kilhertz. 1x10
F: Farad. The unit of capacitance.
μF: Microfarad 1x10
nF: Nanofarad. 1x10

Keypad

See Table 2 indicated for information about the keypad operations:
Key Function
Any switch position
Any switch position
Any switch position

Terminals

See Table 3 indicated for information about the terminals:
Terminal Description
Return terminal for all measurements.
(Receiving the black test lead or the "com"plug of the
special multi-function socket)
Input for voltage, resistance, diode and continuity
measurements. (Receiving the red test lead)
Input for capacitance, temperature, hFE and mA current
measurements. (Receiving the red test lead or the "+"plug
of the special multi-function socket)
Input for the 200mA to 10A current measurements.
(Receiving the red test lead).
www.grupotemper.com
or 1.000 ohms.
3
or 1.000.000 ohms.
6
or 1.000 hertz.
3
or 0.000001 farads.
-6
or 0.000000001 farads.
-9
Table 2. Keypad
Operation performed
Turn the meter on or off
Press HOLD to enter and exit Data Hold
mode
Press to turn the backlight on. After about 5
seconds, the backlight is auto-off.
Table 3. Terminals
KMD 02
Digital multimeter
Instructions manual | 29