Triplex Series
HIGH PRESSURE DIAPRAGM PUMP
160 PSI (11 BAR) / 1.4 Max. GPM (5.5 LPM)
SPECIFICATIONS
Pump Design:
Motor Design:
Voltages:
Pump Head:
Elastomers:
Diaphragm
Check valves
Max. Flow Rate:
Max. Pressure:
Liquid Temp:
Duty Cycle:
Weight:
Certifications:
Wiring Options
Port Size inlet/outlet:
WARNING – FIRE AND EXPLOSION HAZARD
DANGER – REDUCE THE RISK OF ELECTRIC SHOCK
CAUTION – BURN HAZARD
3 chamber diaphragm
Permanent magnet DC and
rectified (PMDC) AC
12, 24 VDC
110, 230 VAC
Glass Filled Nylon
Santoprene™
EPDM or Viton
1.4 GPM (5.5 LPM)
160 psi (11 bar) switch cutoff
40° F (5° C) Min
140° F (60° C) Max*
Intermittent
7.6 lbs (3.5 kg) max.
CE, NSF components, UL
Standard 14 AWG leads
3/8" NPTF
Installation site must be well
vented and free of all flammable
materials and fluids (fuel, oil,
kerosene, etc) from area. Failure
to comply may result in fire,
damage to the pump and /or
personal injury.
Disconnect power from the system
before working on the unit to
avoid personal injury, damage to
the surrounding environment and/
or damage to the unit.
Motor case could get hot during
extended operation. Prolonged
contact with skin may cause a
burn.