CST/BERGER Lasermark 58-ILMXT Manual De Instrucciones página 11

ACCESSORIES
Mini Laser Tripod w/ Magnetic Mount (Fig. 7)
Tilts in two directions allowing the laser to set at any angle.
1. 1/4- 20 thread adapts to 5/8 x 11
2. Platform swivels in both directions to allow laser line positioning at any angle
3. Positioning Knobs
4. Folding tripod legs with non-skid rubber feet
5. 5/8- 11 thread mounts to surveying tripod
6. Industrial Strength Magnetic Mount
LLD-20 Laser Line Detector
The Laser Line Detector aids in locating and targeting a visible or invisible beam emitted by a line
laser; perfect for use in outdoor conditions, where sunlight and distance may make locating the
beam more difficult.
Features-Laser Detector (Fig. 8 )
1. LCD readout window
2. Speaker
3. Beam capture window
4. Power ON/OFF
5. Beam resolution
6. Volume ON/OFF
7. LCD readout window
8. Battery door
Power-Laser Detector
A 9-volt battery will provide up to 3 months of typical usage. When the laser tool is turned on and
the low battery symbol remains lit, the battery should be replaced.
Operation– Laser Detector
1: Turn on the laser tool by pressing the ON/OFF pad. The LCD symbols will momentarily
flash and the "medium" beam indicator symbol will remain lit and the audio signal will be on.
(Fig. 8)
2: Expose the beam capture window of the laser detector towards the direction of the
rotating laser.
LCD Display
9. High Beam
10. Low Beam
11. Speaker Volume
12. Beam Resolution
13. Level Beam
14. Battery Strength
ILMXT • 11