Shure PSM 300 Guia Del Usuario página 6

▇ Applications
Refer to the following PSM300 system scenarios prior to installation. Understanding the configuration options before setting up helps to identify signal
routing requirements and plan for future expansion. Specific information on how to set up the PSM300 system and create mixes for monitoring can be
found in the "System Setup and Configuration" and "Operation" sections of this user guide.
Single System for an Individual Performer
This configuration provides in-ear monitoring in a solo performance,
or in a group performance in which only one person requires wireless
monitoring. This system can be expanded for multiple performers
by using additional P3R bodypack receivers tuned to the same
transmitter.
PSM300 Transmitter P3T
P3T
input
sync
Mixer Outputs (Auxiliary/Monitor)
power
group channel
(1-9) (1-F)
Single Transmitter with Multiple Receivers
Multiple performers can monitor audio from the same transmitter and
still adjust the signal at their bodypack to personalize the mix. Simply
tune each bodypack to the same frequency as the transmitter and use
the MixMode knob to adjust the mix.
MixMode or Stereo Operation:
Each performer has the option of setting their bodypack to MixMode or
Stereo when the transmitter is set to Stereo-MX. When the bodypack
is powered on, it is set to stereo by default. To operate in MixMode,
hold the GROUP button when turning the power on. For information on
these modes, see "MixMode and Stereo Monitoring".
P3T PSM300 Transmitter P3T
input sync
Mixer Outputs (Auxiliary/Monitor)
6
group channel power
(1-F)
(1-9)