Bosch FlexiDome XF Serie Manual De Instalación página 24

FlexiDome
XF & DN
If the camera is in monochrome mode, all color related menu items are
disabled and cannot be accessed.
Day/Night submenu**
Function Selection
DAY/NIGHT COLOR, MONO,
AUTO
SWITCH -15 - 0 - +15
LEVEL
PRIORITY COLOR, MOTION
IR NORMAL,
CONTRAST ENHANCED
MONO ON, OFF
BURST
EXIT
Enhance submenu
Function Selection
AUTO ON, OFF
BLACK
SHARPNESS -15 - 0 - +15
DNR AUTO, OFF
(dynamic
noise
reduction)
Bosch Security Systems | 2005-10 | V1.0
| Installation Manual
Description
• In MONO mode the IR filter is removed, giving
full IR sensitivity.
• In AUTO mode the camera switches the filter
depending on the scene illumination level.
To set the video level in AUTO mode at which the
camera switches to monochrome operation.
In AUTO mode:
• COLOR: the camera gives a color image as long
as the light level permits.
• MOTION: the camera avoids motion blur as long
as the light level permits.
• In Enhanced mode the camera optimizes
contrast in applications with high IR illumination
levels.
• In Normal mode the camera optimizes contrast in
mono applications with visible light illumination.
• OFF: the color burst in the video signal is
switched Off in monochrome mode of the
camera.
• ON: the color burst remains active even in
monochrome mode of the camera.
Return to Shutter/Gain submenu
Description
Autoblack ON automatically increases the
visibility of details
Adjusts the sharpness of the picture. 0
corresponds to the default position.
In AUTO mode the camera automatically reduces
the noise in the picture. This may cause some
motion blur on moving objects.
EN | 23