EdilKamin SALLY Instalación Uso Y Mantenimiento página 34

V
fig. 13
fig. 14
fig. 15
INSTALLATION
SMOKE OUTPUT
SALLY is designed for the connection of the smoke output at
the back or top.
The stove is delivered ready for the output of the flue from the
back (Fig. 13).
TOP SMOKE OUTPUT CONNECTION
Fig. 13-14
• Remove the right metal side (A - Fig. 11), by means of the
three screws (V) on the back of the stove.
• Remove the closing cover (Q - Fig. 14)
Fig. 15-16
• Remove the elbow joint (X - Fig. 15) complete with band
from the smoke extractor unit and reposition it with the con-
Q nection point to the smoke output pipe (not provided), directed
upwards.
• Install the smoke output pipe (not provided) using the band
(not provided) on the elbow joint.
• Position the rosette provided (U - Fig. 16).
AFTER COMPLETING THE CONNECTION OF THE
A
SMOKE OUTPUT PIPE TO THE FLUE, REPLACE THE
METAL SIDE.
X
fig. 16
- 34
-
U