System Setup Controls; Menu Navigation Controls; Setup Menu - Options - Lorex L200 Serie Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

System Setup Controls

System Setup Controls
• Enter the SYSTEM MENU screen by pressing the
MENU/EXIT button. Enter the password to display the
Menu Selection Screen.
• Scroll through the 11 options by pressing the UP & DOWN
▲▼
(
) buttons on the Front Panel or Remote Control.
• To enter a sub-menu, navigate to the option (indicated by
the Purple Hightlight) and press the ENTER Button ( ↵ ).
• To exit a SUBMENU, press the MENU/EXIT button.
• To change the options, press the RIGHT and LEFT buttons
◄►
(
).
• To exit the MAIN MENU, press the MENU/EXIT button. If
system changes were made, a prompt will appear to Save
Changes when exiting the menu.

Menu Navigation Controls

• MENU/EXIT Button - Accesses the setup menu, and
returns to previous menu options.
• ENTER Button (↵) - Enters a Menu setting
• UP / DOWN Controls (
through the Menu Options.
• LEFT / RIGHT Controls (
change the Menu Settings.

Setup Menu - Options

The Setup Menu has11 options:
CAMERA – The camera menu contains the individual camera image settings.
RECORD – This menu contains the recording settings for Scheduled recording.
SENSOR – This menu contains the configuration settings for Sensors connected to the DVR
Alarm block.
MOTION DETECTION – Controls the Motion Settings for each channel, including motion detection
area
SCREEN – Contains the settings for the DVR Display and Sequence
AUDIO – This menu controls the Audio Recording, Input and Output
SYSTEM – Contains the System Settings, including Hard Drive, Password, Time and Date Settings,
Network, PTZ Setup and Firmware Upgrading
SEARCH – Search the drive for previously recorded video and events
STATUS – Displays the system settings
FACTORY DEFAULT – Restores Factory Defaults
EXIT – Returns to the main viewing screen
20
▲▼
) - Move Up/Down
◄►
) - Move Left / Right to
CH1
Setup
Camera
Record
Sensor
Motion Detection
Screen
Audio
System
CH3
Search
Status
Factory Default
Exit
100%
07/01/01
Setup
Camera
Record
Sensor
Motion Detection
Screen
Audio
System
Search
Status
Factory Default
Exit
01:02:03

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

L204L208L214L218L204 serieL208 serie

Tabla de contenido