Mac Address - Lorex L200 Serie Manual De Instrucciones

System Setup Controls
NETWORK SUBMENU (CONT.)
PORT – The Port Information is required for
remote access. The default port for the DVR is
8841. Please refer to the Port Forwarding
section of this manual for details.
MAC ADDRESS – The Mac Address is the
unique physical address set by manufacturer,
which is necessary for DDNS network
connection. Do not change this value.
PASSWORD – A Password is required for
network connection. Set the password using
the buttons on the front panel.
DDNS SETUP MENU – The DDNS Setup menu
contains the configuration settings for remote
access via the Lorex DDNS Service
(http://lorexddns.net).
A DDNS Service updates the remote connection
information, and is useful when the IP Address
frequently changes.
32
DDNS SETUP
•
Enable: Set to YES if using the DDNS
Service. DDNS ID: DDNS SERVER SET-
UP (ENABLE): Select "YES" in name
server set-up.
•
DDNS ID: Enter the name from the
DDNS Registration using the virtual
keypad. Press ENTER once complete.
•
DDNS PASSWORD: Enter the
password from the DDNS Registration
using the virtual keypad. Press ENTER
once complete.
•
DOMAIN NAME: Enter the domain
name from the DDNS Registration
using the virtual keypad. Press ENTER
once complete.
NOTE: Do not enter the entire DDNS address
(i.e. myurl.lorexddns.net) – only the first part of
the address should be entered (i.e. myurl from
the example above).
•
STATUS: Displays the status of the
DDNS Connection. A Success message
indicates that the network connection
has been established.