Functional Description - Abicor Binzel iROB Pulse 400 Instructivo De Servicio

5 Functional description

5 Functional description
1 2
18
17
16
15
14
®
1 Torch neck ABIROB 6
ABK
2 Master drive MF1
3 Robot 7
4 iROB Feed MP 8
5 iROB Feed 22 9
10 EWR gas regulation unit
Fig. 5 Components of the robot welding equipment
The robot welding power source iROB Pulse (13) is a fully digitized remote robot welding power source
(digital signal processing DSP and communication via CAN bus) and fulfils various requirements for
automatic or robot mode.
The robot welding power source iROB Pulse (13) is operated via a remote control iROB Control (11)
or the robot control (14).
The built-in microprocessor allows complete control of all welding functions. The robot welding power source
is suitable for the following MIG/MAG welding processes:
• MIG/MAG (MSG) standard
• MIG/MAG (MSG) pulse
• MIG/MAG (MSG) double pulse
The menu levels can be released according to user groups, for example setup engineer, foreman, etc.
All electronic components are installed in the metal housing. The power supply is provided via a separate
connecting cable. For the connection voltage and power consumption:
 3.1 Technical data on page EN-6
EN - 12
3
iFEED Comfort
13 12
11 Remote control iROB Control
Wire basket spool holder
iROB Spool 12 Coolant recirculator iROB Cool
Masterliner 13 Robot welding power source
Drum spool iROB Pulse
Shielding gas 14 Robot control
4 5
iFEED MP
iROB
iCOOL
11 10
15 Torch neck ABIROB
16 Torch neck ABIROB
17 Torch neck ABIROB
18 Torch neck ROBO WH
iROB Pulse
6
7
9 8
®
GC
®
W
®
A
BAL.0323.0 • 2017-08-31