Installing The Everest Printer Driver (Macintosh) - Rimage Everest III Manual De Instrucciones

Rimage Everest III printer

Installing the Everest printer driver (Macintosh)

Important! To install the Everest printer driver, you must log on with an administrator
account.
1. Install the printer driver.
a. Insert the software disc in the computer disc drive.
b. Run the Rimage Everest Installer.
c. Select Install. The installation begins.
d. When the installation is complete, select Quit. The installation completes and the
installation window closes.
2. Add the Everest printer to your printer list.
•
Using OSX v 10.4
a. Navigate: System Preferences > Print & Fax. The Print & Fax window opens.
b. From the Print & Fax window, select
c. From the Printer Name list, select CDPR22.
d. Select Add. The printer is added to the printer list and the Printer Browser window
closes.
e. Close the Print & Fax window.
•
Using OSX v 10.3
a. Navigate: System Preferences > Print & Fax. The Print & Fax window opens.
b. From the Print & Fax window, select Setup Printers. The Printer List window opens.
c. From the Printer List window, select Add. The Printer List window updates to display
available printers.
d. From the printer list popup menu, select USB. In the printer list, CDPR22 displays.
e. From the printer list, select CDPR22.
f. Select Add. The printer is added to your printer list and the Printer List window
closes.
g. Close the Print & Fax window.
8
. The Printer Browser window opens.
110875_A