ABB M2233 Serie Manual De Instrucciones página 19

ABB-Welcome
Fig. 10 Activating the custom function
The program button can be configured with different functions, e.g. call to guard unit,
intercom call or control switch actuator. Its default function is the release of the second
lock, which is connected with terminals COM-NC-NO of an outdoor station.
If no function is assigned to the program button, there will be no action after pressing
this program button.
Only the existing intercom call list & switch actuator list can be assigned for the program
button.
No. Functions
If the function "release second lock" is assigned to the program button,
1
the "open door" icon will be displayed when you press the program button.
If the function "control switch actuator" is assigned to the program button,
2
the "actuator" icon will be displayed when you press the program button.
If the function "make an intercom call" is assigned to the program button,
3
the call will be activated directly when you press the program button.
If function "call guard unit" is assigned to the program button, the call will
4
be activated when you press the program button.
|
4
— 18 —