Chapter 6. Routine Maintenance ◎ Cleaning Of Thermal Printing Head And Roller; Cleaning Of Outer Cabinet Cleaning; Cleaning Of Filter - Hiti P530D Manual De Instrucciones

Chapter 6. Routine Maintenance
◎ Cleaning of Thermal Printing Head and Roller
By using thermal transfer technology, daily maintenance is not necessary if the printer has
been using properly. However, in order to keep the best print quality, it is highly recommended
to clean Thermal Printing Head and Roller regularly.
: Improper cleaning of the thermal head may damage the thermal head. Please contact
HiTi dealers for cleaning and maintenance of the thermal head.
Make sure the power is turned off and the thermal head has been sufficiently cooled
down before cleaning rollers.
Do not leave fingerprints on the heating element, it can damage the thermal head.
Be careful not to hurt by the protrusions of the printer.
◎ Cleaning of Rollers
Use double side adhesive tape to clean the rubber section of the roller.

◎ Cleaning of Outer Cabinet cleaning

Wipe the printer with a soft cloth. If the stains are not removed, wet the cloth and apply
weakened neutral Detergent to it.
: In case of foreign substance get into the printer, please switch off the printer, remove the
power cord and contact with dealers or service center for further help. Continuous use of
the printer under such condition can cause the fire and electric shock.
: Continuous use under the abnormal condition such as high temperature, smoke and
strange smell can cause the fire and electric shock. Please switch off the printer, remove
the power cord and contact with dealers or service center for further help.
: Do not use volatile solvents or spray insecticide on the printer outer cabinet. Otherwise,
discoloration or crack may result.
◎

Cleaning of Filter

If the dust collects on the openings, please clean it with vacuum cleaner.
18