Handling Instruction - Hiti P530D Manual De Instrucciones

: Do not place the printer on rickety place and/or inclined place. Printer may fall down or
tumble and it can cause serious injury.
＊ Attention: Keep the printer out of direct sunlight
＊ Attention: Do not put metallic objects or case/cup with any liquid on top of the printer. Water
spilt on metallic items fall into the printer may cause the fire and electric shock. In case the water
spilt or metallic items fall into the printer, please turn off the printer power immediately.
: Do not block the openings of the printer. In case, the opening blocked, the heat will
remain inside and it can cause the fire.
: Do not insert or fall the metallic or flammable items into the printer through the
openings of the printer, it can cause the fire or electric shock.
◎

Handling Instruction

When handling the printer, please pay attention to the followings:
: Lift the printer from its box and put it onto a flat and firm table or desk.
: The printer alone (without paper and ribbon installed) is weighted around 18Kg. Please
handle the printer carefully to prevent personal injury and damage of the printer.
: When moving the printer, hold the bottom edge of the printer. It is strongly
recommended to handle the printer by one to two persons during the transportation.
: Please take caution when transporting the printer on the slippery floor.
4