Chapter 4. Routine Maintenance; Cleaning Of Thermal Head And Roller - Hiti P720L Manual Del Usuario

Chapter 4. Routine Maintenance

Cleaning of Thermal Head, and Roller
By using thermal transfer technology, daily maintenance is not really necessary if the printer has
being use properly.
However, in order to keep the best print quality, it is highly recommended to clean Thermal Head
and Roller once in a month.
Caution: Make sure that the power is turned off before cleaning.
Thermal Head reaches high temperature right after printing. Do not touch by
hands directly. Make sure the thermal head has been sufficiently cooled down
before starting cleaning.
When fingerprint stick to the heating element, it can damage the Thermal Head.
Do not touch directly by hands.
Be careful not to be hurt by the projections of the printer.
1. Use gauze; clean the heating element
(glass bar) of the thermal head with ethyl alcohol.
2. Use gauze dipped with ethyl alcohol, and
cleans the edge of the peel-apart plate.
4 - 1
HiTi P720L user manual