Ingeteam INGEREV CITY Ground Manual De Instalacion Y Uso página 41

Operation
2. Identify the card using the reader located on the area indicated below the display.
In the case of a correct reading the charging station switches to awaiting charge status. An image of a
plug flashes on the display.
3. Manually raise the cover and connect the cable to the required electrical socket.
Depending on the connector type used, the operation may vary slightly:
Connector type
CEE 7/4 Type F (Schuko)
ABA2020IQM01_B - Installation and Operation Manual
Connection detection
Automatic detection after lowering the
cover
Ingeteam
Regulation governing the charge
sequence
IEC61851
EN
ES
FR
IT
41