Charging Process; Ingerev City Ground - Ingeteam INGEREV CITY Ground Manual De Instalacion Y Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Ingeteam

INGEREV CITY Ground

Status
Awaiting vehicle
Awaiting charge
Charge
Reduced consumption
End of charge
Incident
Standby
End of session
Card rejected
INGEREV CITY Duo
Status
Awaiting vehicle
Awaiting charge
Charge
Reduced consumption
End of charge
Incident
Standby
End of session
Card rejected
Select socket

9.2. Charging process

9.2.1. INGEREV CITY Ground
The electrical supply connector must not be removed from the vehicle while the charging is being
carried out.
Starting the charge process
1.
Check that the charging station is in awaiting vehicle status with the green light.
40
Lighting
Continuous green
The charging station is waiting for a vehicle to be connected in order to
proceed with charging.
Flashing yellow
A user has identified a card using the reader and the charging station is
waiting for the user to connect their vehicle to the station.
Continuous blue
A vehicle has been connected to the charging station.
Flashing blue
The consumption is reduced.
Flashing yellow
After a vehicle has been charged, a user has identified their card using the
reader and the charging station is waiting for the vehicle to be disconnected.
Continuous red
The charging process is not being carried out correctly due to a problem.
None
The charging station has been remotely shut down.
Steady white
The charge has finished.
Steady white
The card is not valid or has not been recognized.
Lighting
Continuous green
The charging socket is waiting for a vehicle to be connected in order to
proceed with charging.
Flashing yellow
A user has identified a card using the reader and has selected the charging
socket and said socket is waiting for the user to connect their vehicle to the
station.
Continuous blue
A vehicle has been connected to the charging station.
Flashing blue
The consumption is reduced.
Flashing yellow
After a vehicle has been charged, a user has identified their card using the
reader and the charging station is waiting for the vehicle to be disconnected.
Continuous red
The charging process is not being carried out correctly due to a problem.
None
The charging station has been remotely shut down.
Steady white
The charge has finished.
Steady white
The card is not valid or has not been recognized.
Current status lighting,
Once the card has been identified, it waits for the socket selection to start
flashing
the charging process.
Description
Description
ABA2020IQM01_B - Installation and Operation Manual
Operation

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Ingerev city duo

Tabla de contenido