Add Detergent; Install The Spray Tip - GreenWorks Pro GPW 3000 Manual Del Operador

Ocultar thumbs Ver también para GPW 3000:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

EN
SPRAY TIP
APPLICATION
Green - Narrow fan tip (25° )
O
25
White - Wide fan tip (40° )
O
40
Black - Soap spray tip
SOAP
Turbo nozzle tip
4.3.2

INSTALL THE SPRAY TIP

1. Pull back the quick-connect collar (19) on the spray wand
(4).
2. Insert the spray tip (18) onto the spray wand (4).
3. Release the quick-connect collar (19) to attach the spray
tip (18).
4. Pull on spray tip (18) to ensure it is properly installed and
does not pull out.
The green pressure washer tip pro-
vides high versatility with its 25 de-
gree angle tip. Referred to as the
washing tip, because it provides ade-
quate pressure to remove dirt from
surfaces, but is designed to not dam-
age many surfaces. This pressure
washer tip is designed for "sweep-
ing" foliage or debris given its wide
angle. This tip is versatile due to its
wide area of cleaning and strong
pressure application.
The white 40 degree tip, referred to
as the "fan" tip creates the widest
area of cleaning with relatively low
pressure. This pressure washer tip is
best used for light or delicate clean-
ing applications. It is recommended
for light cleaning on wood decks and
other soft or delicate surfaces.
The black soap spray tip, is used for
soap application. Soap is applied un-
der low pressure high volume for op-
timum performance. Soap cannot be
applied under high pressure with this
machine.
The nozzle rotates in a zero to 15 de-
gree spray pattern in a circular mo-
tion to break down tough dirt and
grime. The spray pattern can cover
area of 4 to 8 inches wide, depending
on a distance between the tip and the
surface being cleaned.
English
4.4

ADD DETERGENT

Do not use household detergents, acids, alkalines, bleaches,
solvents, flammable material, or industrial grade solutions,
which can do damage to the pump.
Read the instructions on the solution bottle to prepare
detergent.
If it is necessary, use a funnel to prevent the spill of
detergent. Clean and dry the spilled detergent when you fill
the tank.
Soap/detergent can only be applied with this machine when
the black nozzle(75 degree) is installed.
1. Place the pressure washer upright on a flat surface.
2. Open the cap on the detergent tank (6).
3. Pour detergent into tank (6).
4. Reinstall cap.
Do not let detergent dry on the surface to prevent streaks.
10
6
WARNING
WARNING
NOTE
NOTE
NOTE

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Pwa207

Tabla de contenido