Hitecsa EQP1X 117 Manual De Instalación, Uso Y Mantenimiento página 43

Press the Mode key to position the cursor on the value
MODE
to be modified.
Press the UP or DOWN key to modify it.
Press the MODE key to confirm.
MODE
Press the Prg key for 2 seconds to exit.
Prg
HITECSA Code:
FLRHSMCH2O_EX
Ver.: 1.9 09/05/08
ENGLISH
Bios: 4.10 20/02/07
Boot: 4.03 03/07/06
I.7.6.3 Condensing menu control
!
ALARM
MODE
Prg
ON
OFF
Use the UP/DOWN keys to scroll through the following screens:
Enable press. probe
Circuit 1 Y
Circuit 2 N
Vent. type Propor.
Press the Mode key to position the cursor on the value
MODE
to be modified.
Press the UP or DOWN key to modify it.
Press the MODE key to confirm.
MODE
Press the Prg key for 2 seconds to exit.
Prg
IOM_EQP1X_117a133_208094_200901_ES-EN-FR-DE-IT
Software version
Bios version
Boot version
Setpoints menu
Probe menu
MODE
> Condensing control
Rem. Summer/Winter
Enable condensation control.
Fan control type
I.7.6.4 Remote Automatic/Select Menu
The Rem. Auto/Select menu makes it possible to enable remote
AUTOMATIC and SELECT
To enter the desired menu:
 select the menu using the UP-DOWN keys;
 Press the Mode key to access it.
MODE
Use the UP/DOWN keys to scroll through the following screens:
Enable Auto/Select
remote control
Press the Mode key to position the cursor on the value
MODE
to be modified.
Press the UP or DOWN key to modify it.
Press the MODE key to confirm.
MODE
Press the Prg key for 2 seconds to exit.
Prg
I.7.6.5 User menu
IMPORTANT!
Access to this menu is password-protected.
To enter the desired menu:
 select the menu using the UP-DOWN keys;
 Press the Mode key to access it.
MODE
45
SECTION I: USER
switch over.
!
ALARM
Setpoints menu
Probe menu
Prg
Condensing control
> Rem.Auto/Select
ON
OFF
Remote operating mode control
N enablement
!
ALARM
Probe menu
Condensing control
Prg
Rem.Auto/Select
> User menu
ON
OFF
MODE
MODE