Set Clock; Cleaning Cycle; Auto Start - Sage Oracle BES980 Guía Rápida

OPERATING YOUR NEW APPLIANCE
SHOT TEMPERATURE
Turn the SELECT dial to required temperature
then press SELECT dial to set.
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE

CLEANING CYCLE

The cleaning cycle cleans the shower screen and
back-flushes the group head. Select this feature
when the LCD displays 'CLEAN ME!' Refer to
'Cleaning Cycle', page 18.
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
SELECT SELECT SELECT
SELECT SELECT SELECT

SET CLOCK

Setting the clock is optional. While 'SET CLOCK'
is displayed on the LCD, press the SELECT dial.
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE

AUTO START

Auto Start allows you to program the specific
time when the machine will automatically turn on.
By programming your machine, you will not have
to wait for it to pre-heat.
While 'AUTO START' is displayed on the
LCD, press the SELECT dial. Turn the SELECT
dial to 'On' or 'Off'. Press SELECT dial to set.
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
SELECT SELECT SELECT
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
EN
13