Advanced Features - Sage Oracle BES980 Guía Rápida

OPERATING YOUR NEW APPLIANCE
5. Rotate the SELECT dial to the custom
setting you'd like to program - 'Set 1' to
'Set 6'. Settings that have already been
programmed will display a cup icon.
NOT PROGRAMMED
PROGRAMMED
6. To start programming, press the SELECT
dial. The LCD will show a moving cup
icon and espresso will extract from the
portafilter spouts. When the required
amount has been extracted, press the
SELECT dial to stop the flow of espresso
and start the flow of hot water. When the
required amount of water has poured,
press the SELECT dial to stop the flow
of hot water.
PROGRAMMED
7. To use your custom Long Black setting,
rotate the LONG BLACK dial. Your
programmed custom Long Black setting will
appear after the preset small, medium and
large settings. Press the LONG BLACK dial
and your programmed Long Black setting
will dispense.

ADVANCED FEATURES

These features should only be accessed
by experienced users.
To access Advanced Features, with the machine
turned off, press and hold the 1 CUP button, then
press and hold the POWER button together for
3 seconds.
Rotate the SELECT dial to the desired feature.
Press SELECT dial to access feature settings.
Press the MENU button at any time to exit
Advanced Features.
Reset Default Settings (rSEt)
Use this function to reset all programmable values
back to the default settings. The machine has the
following default settings:
1. Shot Temperature: 93˚C
2. Low Pressure Pre-infusion:
PP60, PT07 seconds
3. Milk Temperature: 60˚C
4. Auto Start: OFF (8:00am)
5. Auto Off: 20 min
6. Clock: 12:00am
7. 1 CUP Button Shot Duration:
25 seconds
8. 2 CUP Button Shot Duration:
30 seconds
While 'rSEt' is displayed on the LCD, press the
SELECT dial to reset all settings to factory defaults.
+
POWER
+
EN
15