Steren AMP-210SD Manual De Instrucciones página 22

14. CD/AUX: Set the volume level of the auxiliary equipment connected to the
amplifier.
15. MIC 3: Microphone 3 volume control.
16. MIC 2: Microphone 2 volume control.
17. MIC 1: Microphone 1 volume control.
18. MIC-3: Microphone 3 input.
19. MIC-2: Microphone 2 input.
20. MIC-1: Microphone 1 input.
21. Output signal indicator
22. Power LED indicator
23. ON/OFF switch
24. SD/USB: Select SD / USB device.
25. Gain: Insert a screwdriver to set the level gain of recording.
26. PEAK: It lights up when the volume of recording from the microphone is too
loud.
27. USB port: Here you can insert a USB stick
8