Removing The Front Wheel - Husqvarna SMR 511 2012 Manual De Uso

REMOVING THE FRONT WHEEL

Set a stand or a block under the engine and see that the
front wheel is lifted from the ground.
- Loosen screws (1) securing wheel axle (2) onto fork
leg mounts.
- Hold wheel axle head and, at the same time, loosen
screw (3) on the opposite side; draw the wheel axle out.
SPECIFICATIONS - OPERATION - MAINTENANCE
EN - 40
Note *:
Do not operate the front brake lever when the wheel has
been removed; this causes the calliper pistons to move
outwards. After removal, lay down the wheel with brake
disc on top.
1 1
2
1
3