Removing The Front Wheel - Husqvarna SMR 450-R 2009 Manual De Uso Y Mantenimiento

REMOVING THE FRONT WHEEL

Set a stand or a block under the engine and see that the front
wheel is lifted from the ground.
Remove the two screws (A) and the brake caliper.
Loosen the bolts (1) holding the wheel axle (2) to the front
fork stanchions. Hold the head of the wheel axle in place, un-
screw the bolt (3) on the opposite side; draw the wheel axle
out.
SMR-R
A
40
NOTES
Do not operate the front brake lever when the wheel has been
removed; this causes the caliper piston to move outwards.
After removal, lay down the wheel with brake disc on top .
1
2
SMR-R
1
3
SMR-R