Removing The Front Wheel - Husqvarna TC 250 2009 Manual De Uso

MUM2-250_310_450_510_2009_GB

REMOVING THE FRONT WHEEL

Set a stand or a block under the engine and see that the front
wheel is lifted from the ground. Loosen the bolts (1) holding
the wheel axle (2) to the front fork stanchions.
Hold the head of the wheel axle (2) in place, unscrew the bolt
(3) on the opposite side; draw the wheel axle out.
40
18-11-2008 11:18 Pagina 40
NOTES
Do not operate the front brake lever when the wheel has been
removed; this causes the caliper piston to move outwards. After
removal, lay down the wheel with brake disc on top.
2
1
1
3