Andis MLC Manual De Uso página 6

CLIPPER INDICATOR
LIGHT STATUS
When the clipper is running
in cordless operation, a blue
clipper indicator light (Figure B)
means the battery has a
strong charge. When the
light turns red, the battery
level is low and should be
recharged as soon as
possible. If the clipper
automatically powers OFF,
move the power switch to
the OFF position and either
charge in the charging stand
or plug in to the cord to
continue trimming.
The clipper automatically
powering off protects the
lithium-ion battery and is not a malfunction. The clipper will resume normal
operation when it is recharged or plugged in to the power cord. The MLC clipper,
by design, will run at full power until the battery is fully depleted.
USING ATTACHMENT COMBS
(Some models do not have combs and sizes will vary by kit)
To use, slide front of attachment comb over the teeth of the blade. Snap comb
down over back of blade (Figure C). Use the clipping guide to find the approximate
lengths of cut. Different blade angles in relation to the skin, thickness and texture
of the hair will vary the cutting length.
Description
Standard Andis Blade
1/8" Attachment Comb
1/4" Attachment Comb
3/8" Attachment Comb
1/2" Attachment Comb
3/4" Attachment Comb
1" Attachment Comb
6
CLIPPER INDICATOR LIGHT STATUS
Clipper in Charging Stand
Fully Charged
Charging
Clipper in Use (Cordless)
Full Charge
Low Charge
Clipper in Use (Corded)
Running
OFF with Full Charge
OFF without full charge
CLIPPING GUIDE
Clipping Direction
With hair grain
Against hair grain
With hair grain
Against hair grain
With hair grain
Against hair grain
With hair grain
Against hair grain
With hair grain
Against hair grain
With hair grain
Against hair grain
With hair grain
Against hair grain
Solid Blue
Blue Fade In and Out
Solid Blue
Solid Red
Solid Blue
Solid Blue
Blue Fade In and Out
Approximate Length of Cut
Blade set to
shortest cut
1/16" (1.6 mm)
1/32" (0.8 mm)
1/4" (6.4 mm)
1/8" (3.2 mm)
3/8" (9.5 mm)
1/4" (6.4 mm)
1/2" (12.7 mm)
3/8" (9.5 mm)
5/8" (15.9 mm)
1/2" (12.7 mm)
7/8" (22.2 mm)
3/4" (19.0 mm)
1-1/8" (28.6 mm)
1" (25.4 mm)
Blade set to
longest cut
3/16" (4.8 mm)
1/8" (3.2 mm)
3/8" (9.5 mm)
1/4" (6.4 mm)
1/2" (12.7 mm)
3/8" (9.5 mm)
5/8" (15.9 mm)
1/2" (12.7 mm)
7/8" (22.2 mm)
5/8" (15.9 mm)
1-1/8" (28.6 mm)
1" (25.4 mm)
1-3/8" (34.9 mm)
1-1/4" (31.8 mm)