Selecting The Transmitter (Pulse Or Cadence Or None) - VDO MC 2.0 WL Manual De Instalación Y Operación

SET PULSE--HIGH LIMIT appears on the display.
Press ALTI A
it. Once you have set the correct value, press
confirm your setting.
SET CADEnCE--LOW LIMIT appears on the display.
Press ALTI A
it. Once you have set the correct value, press
confirm your setting.
6.5 Selecting a sensor
See also section 3.8.
You can use this area to determine whether you want to ride with
heart rate data or cadence data. You can change this before each trip.
Process:
Press and hold M for three seconds. SETTInGS--OPEn? flashes.
LAnGUAGE---SELECT---appears on the display.
to reduce the value or P to increase
to reduce the value or P to increase
SET CADEnCE--HIGH LIMIT appears on the display.
Press ALTI
M to it. Once you have set the correct value, press
confirm your setting.
PErS. DATA--SET OK? query.
Press
M to The MC 2.0 confirms by displaying PErS. DATA--SET
DOnE.
To exit settings mode, press and hold the
SETTInGS--CLOSE? flashes. The MC 2.0 switches back to function mode.
Press P
Press
www.vdocyclecomputing.com
PL NL ES IT
A to reduce the value or P
M in confirmation or C to make a correction.
C button for three seconds.
P to scroll to SEnSOr---SELECT---.
M in confirmation.
FR ENG DE
to increase
M to
MC 2.0 WL 63