Battery Disposal - Andis LCL-2 Manual De Uso

IMPORTANT: Frequently remove accumulated hair from the cavity under the blade
set. Remove the blade set as described above and brush hair from the cavity using a
small brush, toothbrush or Andis Dry Care.
USE GUIDELINES FOR LITHIUM-ION BATTERIES
1. The lithium-ion battery included with your clipper does not develop a "memory
effect" like a nickel-metal hydride (NiMH), or nickel cadmium (NiCd) battery. You
can plug the adapter cord into the clipper at any time for a full charge, or even use
the battery before a charge cycle is complete. Like most rechargeable batteries,
lithium-ion batteries perform best when used frequently.
2. For maximum battery life, store the clipper in a partially discharged condition if the
unit will be unused for several months.
3. Do not store clipper under 50°F or over 104°F. Do not expose clipper to excessively
damp conditions.
4. Avoid locating the clipper near heat vents, radiators, or in direct sunlight. Optimum
charging will result where the temperature is stable. Sudden increases in
temperature can result in the battery receiving less than a full charge.
5. Many factors influence lithium-ion battery life. A battery that has received heavy use
or is more than a year old may not give the same run-time performance as a new
battery pack.
6. New lithium-ion batteries, unused for a period of time, may not accept a full
charge. This is normal and does not indicate a problem with the battery or charger.
The battery will accept a full charge after several cycles of clipper use and recharging.
7. Disconnect the adapter cord from the AC outlet if extended periods of non-use are
anticipated.

BATTERY DISPOSAL

The product you have purchased contains a rechargeable battery. The battery is
recyclable. At the end of its useful life, under various state and local laws, it may be
illegal to dispose of this battery into the municipal waste stream. Check with your local
solid waste officials for details in your area for recycling options or proper disposal.
FACTORY REPAIR SERVICE
When the blades of your Andis clipper become dull after repeated use, it is advised to
purchase a new set of blades available through your Andis supplier or through an
Andis authorized service station. If you wish your clipper to be serviced as well, it
should be carefully packed and mailed either Parcel Post Insured, or U.P.S. to any
Andis authorized service station. To find an Andis authorized service station near
you log on to www.andis.com or contact our customer service department at
1-800-558-9441.
7