Install The Car Kit In A Vehicle - Nokia CK-600 Manual Del Usuario

I n s t a l l a t i o n
loudspeaker (such as the SP-3), select
Automatic detection.
Do not use the internal amplifier of the hands-free unit to drive external
loudspeakers to play back music. If you need to replace a fuse on the
CA-153P cable, only use a fuse with a rating of 2 A or less.

■ Install the car kit in a vehicle

This section describes how to install the car kit parts in a vehicle. The
parts are explained in "Parts", p. 11.
When installing the parts of the car kit, ensure that none of them
interfere with or hinder the steering or braking systems or other controls
or systems used in the operation of the vehicle (for example, airbags). Do
not use screws to install the display if you mount it within the head
impact area. Use the supplied adhesive instead.
Installation of the car kit may cause warning or other alert tones in the
vehicle (such as reversing warning tones or lights left on alerts) to be
muted. For further information, contact the manufacturer of the vehicle
or its representative.
Example of appropriate installation, with the display mounted using the
supplied stand
38
Mono speaker instead of