Motion Sensor; Optional Accessories; Mobile Holder; External Antenna - Nokia CK-600 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

I n s t a l l a t i o n

Motion sensor

The hands-free unit HF-23 contains a motion sensor that allows the car
kit to automatically switch on when you turn on the ignition and start
driving. The motion sensor works if it is activated and the ignition sense
wire is not connected.
To activate the motion sensor, switch on the car kit, press the wheel in
the standby mode, select

■ Optional accessories

You can extend the features of the car kit with optional accessories.
Consult your dealer or service technician for suitable accessories for the
car kit. Use only approved and compatible accessories.

Mobile holder

To use your mobile device in a car, you can mount a mobile holder
designed for the device. For compatible holders for your device, contact
your dealer.
If the display of a mobile device is to be used, ensure that the device is
mounted in a holder and that the device display is clearly visible to the
user. Ensure that the holder does not interfere with or hinder the
steering or braking systems or other controls or systems used in the
operation of the vehicle (for example, airbags).
For mounting instructions, see the documentation that came with the
mobile holder.

External antenna

The external antenna improves the reception of the mobile phone in a
car. For availability, contact your dealer.
Note: In order to comply with RF exposure guidelines, install the
external antenna so that a minimum distance of 20 centimetres (8
inches) can be maintained between the external antenna and all
persons, with external antenna gain not exceeding 3 dBi.
44
Settings
>
Installation
>
Ignition sensor
> On.

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido