Nokia 6102i Manual Del Usuario página 44

If data transfer is not started within 2 minutes after the activation of
the IR port, the connection is cancelled and must be started again.
IR connection indicator
When is shown continuously, the IR connection is activated, and
your phone is ready to send or receive data through its IR port.
When blinks, your phone is trying to connect to the other device, or
a connection has been lost.
Packet data (EGPRS)
Enhanced general packet radio service (EGPRS), packet data, is a
network service which allows mobile phones to send and receive data
over an Internet protocol (IP)-based network. It enables wireless access
to data networks such as the Internet.
The applications that may use packet data are MMS, browsing sessions,
remote SyncML, Java application downloading, and the PC dial-up.
To define how to use the service, select
Packet data > Packet data
Select When needed
when an application needs it. The connection will be closed when the
application is terminated.
Select Always online
packet data network when it is switched on.
indicates a packet data connection.
Packet data settings
To connect the phone, use an IR, a Bluetooth technology, or a data cable
(CA-42) connection to a compatible PC. Use the phone as a modem to
enable packet data connectivity from the PC.
To define the settings for connections from the PC, select
Settings > Connectivity
access point, activate the access point you want to use, and select
active access point. Select
for the currently selected access point. Select
and enter the access point name (APN) to establish a connection to an
EGPRS network.
connection.
to set the packet data connection to be established
to set the phone to automatically connect to a
> Packet data
Alias for access
Menu > Settings
> Packet data settings
point, and enter a nick name
Packet data access
S e t t i n g s
> Connectivity >
Menu >
> Active
Edit
point,
43