Lcd And Operation Panel - B.A. International BA Optima E+ Manual De Instrucciones

7. LCD AND OPERATION PANEL

1 Power Button
Push the power button until the power is on and the LCD panel lights.Push the power button until turn off over the I second.
2 Select-S Button
This button is to select the settings for RPM, torque, gear ratio and auto reverse mode in programs 1-5. In programs 6-7
(reciprocation mode), this button is used to select the settings for forward rotation angle and reverse rotation angle.
3 Program-P Button
User can select a program from no. 1 to 7 and also use this button to save settings in the memory.
Up to 7 user defined settings can be saved (programs 6 and 7 are reciprocation modes).
(It can be the button for Program selection and Memory button as well.)
4 Up/Down button
The user can set needed RPM, torque, gear ratio (programs 1-5) and reciprocal angle (programs 6 & 7) using the Up/Down
buttons. In programs 6 & 7 (reciprocation mode), the Up button is to increase, and the Down button to decrease the
reciprocal angle.
5 LCD Panel
Display shows Program, Speed, Torque, Auto reverse mode, Battery and Beep sound mode on the screen.
6 Motor ON/OFF Button
Push the Button, then motor runs and stops.
8
BAE370R_IFU-Final.indd 8 02/04/2019 12:22:32