Silvercrest HG04127A-US Instrucciones De Utilización Y De Seguridad página 17

˜ Qi wireless charging
Put your Qi compatible device to be charged on the centre of
the Qi charging surface
Charging starts automatically when the Powerbank is
switched on. When Qi charging is active, Qi status indicator
lights green.
4
Slightly adjust the charging position of the device to be
charged so that its charging surface is facing down to the
centre of the Qi charging surface
If wireless charging does not start, move your device to be
charged more accurately to the centre of the Qi charging
surface 7 .
While in idle status (standby mode), the Qi charging surface
will illuminate amber in colour.
4
When the charging process has finished the Qi Wireless
charger indicator
The Qi status indicator
the power bank cannot detect any Qi charging device on
the Qi charging surface
compatible device to be charged towards the center of Qi
charging surface
* NOTE:
1) Qi status indicator
(standby mode) when wireless charging has finished if the
mobile device closed the wireless communication between
the Qi charging surface
2) All devices to be charged must be comply with Qi Standard.
7 of the power bank
7
will still illuminate green in colour*.
4
4 also shows quick flashing when
. In this case, move your Qi
7
7 in order to start wireless charging.
4 may change back to amber colour
and the mobile device.
7
8 .
of the power bank
US-EN 17
.
8