Style Function - Brother P-touch 1750 Manual De Instrucciones

EXAMPLE
To select SIZE3:
While holding down f, press 1
1
once, and keep f held down.
While still holding down f, continue
2
pressing 1 until SIZE3 is displayed.
Release f.
3
You can choose from nine different character styles to apply to your text.
Characters printed using the smaller sizes may be difficult to read if certain style set-
tings (e.g., ITALIC+SHADOW) are selected.
The following style settings are available:
NORMAL, OUTLINE, BOLD, SHADOW, ITALIC,
ITALIC+OUTLINE, ITALIC+BOLD, ITALIC+SHADOW, VERTICAL
The default style setting is NORMAL. The style indicator at the bottom left of the display
shows the current style setting when any setting other than NORMAL is selected.
Refer to Reference at the end of this section for samples of the available settings.
To change the style setting:
While holding down f, press 2 once, and keep f held down to display the
1
current style setting.
While still holding down f, continue pressing 2 until the desired style setting is
2
displayed.
Release f to apply the selected style setting to the entire text.
3
18

STYLE FUNCTION

AUTO
SIZE3