Scale Settings - OHAUS BW Serie Manual De Instrucciones

• The LED ndcaton s complemented by an audble alert feature (Sec. 5.2).
• Over-Under values are retaned when the unt s turned off.
• Over-Under values are not retaned when the weghng unt or resoluton
setup are changed.

5. SCALE SETTINGS

5. Accessing the User Setup Mode
Wth the scale on, press ON/UNITS OFF and CHECK smultaneously. "SETUP" then
"S OFF" s dsplayed. To navgate n the User Setup Mode:
• Press ON/UNITS OFF -Yes to accept the dsplayed settng
• Press TARE-No to toggle through avalable settngs
• Press ZERO-Exit to end setup and proceed to "Save"
• Press CHECK-Back to revert to the prevous parameter
5. User Setup Parameters
Parameters
S
Scale automatcally turns off after 15
mnutes of nactvty.
S Scale enters sleep mode after 2
mnutes of nactvty.
S3 CHECK actvaton and Alert Range
S4
Averagng Level
S5 Power-on Weghng Unt
S6 LED Brghtness Level
dsp
Dsplay Type
Save
Save or Abort
Note: Bold settngs are defaults.
Description
BW SERIES COMPACT BENCH SCALE EN-
ON - enables ths functon.
OFF -dsables ths functon.
ON - enables ths functon.
OFF -dsables ths functon.
0 - Check mode s off.
Scale beeps when dsplayed weght s:
1-...wthn the preset Over and Under values
2-...outsde the preset Over and Under range
3-...wthn the preset Over and Under values (Over-Under LED's do not
lght wthn preset range)
4-...outsde the preset Over and Under range (Over-Under LED's do not
lght wthn preset range)
5- Alarm s off (Over-Under LED's do not lght wthn preset range)
6- Alarm s off
0, 1, , 3 (most flterng, longer stablzaton tme)
4, 5, 6, 7 (corresponds to 0, 1, 2, 3 but wth slower dsplay update)
lb, oz, g
0,1,2,3 (dmmest).
OFF - dsplays weght contnuously.
ON - dsplays frst stable weght.
Save - saves changes and reverts to weghng mode.
Abort - reverts to weghng mode wthout savng changes.
Settings