Spare Parts; Maintenance Precautions - Siemens MCS Belt Manual Del Usuario

Maintenance
The MCS is virtually a maintenance-free device. In dusty or granular applications,
periodically check the load cell stops for material build-up. Remove any build-up in the
mechanism to ensure that the load cell maintains free movement.
Re-install the shipping stops during maintenance or any other time when
Note:
protection of the load cells is required.

Spare Parts

The only spare part recommended for the MCS is the load cell. Refer to the load cell
nameplate for the proper size and model number.
Re-balance any load cell that has been replaced. Refer to the Load Cell Balancing
Procedure For Four Load Cells in the integrator manual.

Maintenance Precautions

• When welding near the scale, do not allow current to pass through the belt scale.
• Reset the shipping stops to reduce physical shock to the load cells during
maintenance.
• Recalibrate the scale after maintenance and prior to use.
7ML19985HN63 Milltronics MCS Belt Scale – INSTRUCTION MANUAL Page 21