Hazardous Area Installations - Siemens MCS Belt Manual Del Usuario

Hazardous Area Installations

The nameplate shown is a typical example. Please check the nameplate on
Note:
your device for your specific device configuration.
MILLTRONICS MCS BELT SCALE
7ML1234-56789-0ABC-D
Serial No.: GYZ / S1234567
Input : 15 V
Enclosure : IP65
Ambient Temp. : – 40°C to +75°C
0518
Do Not Disassemble When An Explosive Dust Atmosphere Is Present
Siemens Milltronics Process Instruments Inc., Peterborough
Instructions Specific to Hazardous Area
Installations
(Reference European ATEX Directive 94/9/EC, Annex II, 1/0/6)
The following instructions apply to equipment covered by certificate number
SIRA06ATEX9305X:
1. For use and assembly, refer to the main instructions.
2. The equipment is certified for use as Category 2D equipment and may be used in
hazardous zones 21 and 22 with dusts.
3. This equipment has a maximum surface temperature of T90 °C (in a +75 °C ambient).
Refer to the applicable code of practice for selection of this equipment with respect
to specific dust ignition temperatures.
4. The equipment is certified for use in an ambient temperature range of -40 °C to
+75 °C.
5. If the conductors of the attached cable are terminated in the hazardous area,
appropriate explosion protection ('Ex') methods should be used that meet the
requirements of European Directive 94/9/EC for Group II, Category 2D.
Page 22 Milltronics MCS Belt Scale – INSTRUCTION MANUAL
Max.
N117
Made in Canada
Class II, Div 1, Gr. E, F, G
Class III
IEC Ex SIR 08.0071X
Ex tD A21 IP65 T90°C
II 2 D
Ex tD A21 IP65 T90°C
SIRA 06ATEX9305X
R
7ML19985HN63