Electrical Diagram; Disposal; Ce Declaration - PLYMOVENT MDB-2 COMPACT Manual De Instalación Y De Uso

Article no. Description
MultiDust Bank-2/cOMPAcT
0000100344 SC-200 / Soft connection
0000100539 Motor 2.2 kW (3 HP); 575/3ph/60Hz (IEC)
0000101349 Motor 2.2 kW (3 HP); 208-230/460V/3ph/60Hz (IEC)
0000103126 Dust drawer W=450 mm (17.7 in.)
0000103135 Fan wheel 315/110/24
0000103162 Motor plate TEV-3110 (IEC)
0000104043 FilterControl-2/CE control panel
0000104064 FilterControl-2/UL control panel
MultiDust Bank-4/cOMPAcT
0000100345 SC-250 / Soft connection
0000100542 Motor 4 kW (5 HP); 575/3ph/60Hz (IEC)
0000102530 Motor plate TEV-559 (IEC)
0000103127 Dust drawer W=900 mm (35.4 in.)
0000103133 Motor 4 kW (5 HP); 208-230/460V/3ph/60Hz (IEC)
0000103136 Fan wheel 400/59/28
0000104044 FilterControl-4/CE control panel
0000104065 FilterControl-4/UL control panel
MultiDust Bank-6/cOMPAcT
0000100346 SC-315 / Soft connection
0000100547 Motor 7.5 kW (10 HP); 575/3ph/60Hz (IEC)
0000102532 Motor plate TEV-745 (IEC)
0000103127 Dust drawer W=900 mm (35.4 in.)
0000103134 Motor 7.5 kW (10 HP); 208-230/460V/3ph/60Hz
(IEC)
0000103137 Fan wheel 500/45/38
0000104045 FilterControl-6/CE control panel
0000104066 FilterControl-6/UL control panel
19
8.2 Filtercontrol
The following spare parts are available for the product (refer to
exploded view Fig. VIII on page 92).
Article no. Description
general
0000103139 Switch mode power supply 24V DC 2.5A
0000103141 Rotary switch 0-1
0000103142 Relay DP/DT 24V
0324000300 Indicator light white 24V
0324000310 Indicator light green 24V
0324000320 Indicator light red 24V
0328050300 Push button green
0328050320 Push button black
Filtercontrol-2
0000104072 PLC Siemens Logo! incl. software MDB-2/C
Filtercontrol-4
0000104073 PLC Siemens Logo! incl. software MDB-4/C
Filtercontrol-6
0000104074 PLC Siemens Logo! incl. software MDB-6/C
9

ELEcTRIcAL DIAgRAM

Refer to the separately supplied electrical diagram.
19. Filter cartridge, incl. face mask, disposable gloves and plastic sack with seal for
collection and disposal of the used filter cartridge.
0000104046/150915/0 MultiDust Bank COMPACT
10

DISPOSAL

Dismantling and disposal of the unit must be done by qualified
persons.
Personal protective equipment (PPE)
Wear respiratory protection and protective
gloves when you dismantle and dispose of
the unit.
10.1 Dismantling
To safely dismantle the unit, obey the safety instructions that
follow.
Before dismantling of the unit:
- disconnect it from the mains
- disconnect it from the compressed air
- clean the outside
During dismantling of the unit:
- make sure that the area is sufficiently ventilated, e.g. by a
mobile ventilation unit
After dismantling of the unit:
- clean the dismantling area
10.2 Disposal
Dispose of the pollutants and dust, together with the used
filter cartridges, in a professional manner in accordance with
federal, state or local regulations.

cE DEcLARATION

CE declaration of conformity for machinery
We, Plymovent Manufacturing B.V., Koraalstraat 9, 1812 RK
Alkmaar, the Netherlands, herewith declare, on our own
responsibility, that the products:
- MultiDust Bank-2/COMPACT
- MultiDust Bank-4/COMPACT
- MultiDust Bank-6/COMPACT
which this declaration refers to, are in accordance with the
conditions of the following Directives:
- Machine Directive 2006/42 EC
- EMC 2004/108 EC
- LVD 2006/95 EC
- ErP Directive 2009/125 EC
Signature:
Name: M.S.J. Ligthart
Position: Product Manager
Date of issue: 1st September 2015
EN - 15