Technical Specifications - PLYMOVENT MDB-2 COMPACT Manual De Instalación Y De Uso

Type Description
Inspection hatch To be sourced locally; refer to section 4.8
Non-return valve To be sourced locally; refer to section 4.9
Strobe light To be sourced locally; refer to section 4.6.1
1.4.1 Frequency inverters
The compact design of the unit, in combination with a high air
performance, is achieved by using 60 Hz fan technology. For
this reason it is necessary to install a variable frequency
inverter for 50 Hz power grids (e.g. in Europe).
For 60 Hz power grids a frequency inverter is optional.
MDB-2/c
connection voltage
230V/3ph/60Hz VFD-4
(required)
460V/3ph/60Hz VFD-2.2
(option)
575V/3ph/60Hz 2,2 kW
(option)
Frequency inverters for connection voltage
575V/3ph/60Hz to be sourced locally.
1.5

Technical specifications

general
Fan
Fan type radial
Motor design IEC
Motor protection by PTC thermistor
Efficiency level IE-3
Motor speed max. 3500 rpm
compressed air system
Required compressed dry and oil-free according to ISO 8573-3
air quality class 6
Required pressure 4-5 bar (60-75 PSI)
Compressed air 8 mm push-in fitting
connection
Electrical data
Connection voltage:
- fan - 230V/3ph/60Hz²
- 460V/3ph/60Hz
- 575V/3ph/60Hz
- FilterControl panel - 100-240 VAC single phase 50-60Hz
Activation of start/ by 0-24 VDC signal
stop device
Filter efficiency
CART-D/C/E/PTFE - M according to DIN EN 60335-29
- MERV 11 according to ASHRAE 52.2
CART-MB MERV 16 according to ASHRAE 52.2
MDB-2/c
Compressed air 35 nl
consumption (per (1.2 ft³)
pulse)
Volume of 11 litres (2.9
compressed air gallon)
tank(s)
Filter surface with
filter cartridges:
- CART-D 30 m²
(323 ft²)
- CART-C 30 m²
(323 ft²)
- CART-E 30 m²
(323 ft²)
0000104046/150915/0 MultiDust Bank COMPACT
MDB-4/c MDB-6/c
VFD-5.5 VFD-11
(required) (required)
VFD-4 VFD-7.5
(option) (option)
4 kW 7,5 kW
(option) (option)
MDB-4/c MDB-6/c
75 nl 75 nl
(2.6 ft³) (3.7 ft³)
22,9 litres (6 11 + 22,9
gallon) litres (2.9 + 6
gallon)
60 m² 90 m²
(646 ft²) (969 ft²)
60 m² 90 m²
(646 ft²) (969 ft²)
60 m² 90 m²
(646 ft²) (969 ft²)
- CART-PTFE/10 20 m²
(215 ft²)
- CART-PTFE/15 30 m²
(323 ft²)
- CART-MB 21,4 m²
(230 ft²)
MDB-2/c
Certification:
- MDB-COMPACT with IFA W3
filter cartridges (pending)
CART-PTFE/15 and
additional strobe
light
Capacity of dust 33 litres
drawer (8.7 gallon)
Weight³ 335 kg
(739 lbs.)
Power (fan) 2.2 kW
(3 HP)
Current draw at:
- 230V - 6,5 A
- 460V - 3,25 A
- 575V - 1,3 A
2850 m³/h
Max. airflow
4
(1675 cfm)
Inlet connection Ø 250 mm
(9.8 in.)
Min. duct connection Ø 250 mm
(9.8 in.)
69 dB(A)
Sound level (nom.)
5
2345
Refer to the available product data sheet for
detailed product specifications.
1.7 Dimensions
Refer to Fig. I on page 88.
1.7.1 FilterControl panel
Refer to Fig. II on page 88.
1.8 Performance chart
Refer to Fig. III on page 89.
1.9 Ambient conditions
Process temperature:
- min.
- nom.
- max.
Max. relative humidity
Suitable for outdoor use
1.10 Transport of the unit
The manufacturer cannot be held liable for any transportation
damage after delivery of the unit. Handle the unit and the
accompanying options and/or accessories, if any, with care.
2. The use of a frequency inverter makes the 60 Hz fan suitable to run on a 50 Hz
power grid.
3. without filter cartridges
4. with new CART-D filter cartridges; free-blowing
5. Nominal sound level at 1 m (3 ft) distance @ 1000 m³/h (589 cfm) per filter
cartridge.
40 m² 60 m²
(431 ft²) (646 ft²)
60 m² 90 m²
(646 ft²) (969 ft²)
42,8 m² 64,2 m²
(461 ft²) (691 ft²)
MDB-4/c MDB-6/c
IFA W3 IFA W3
72 litres 72 litres
(19 gallon) (19 gallon)
425 kg 600 kg
(937 lbs.) (1323 lbs.)
4.0 kW 7.5 kW
(5 HP) (10 HP)
- 12,0 A - 22,6 A
- 6,0 A - 11,3 A
- 2,4 A - 4,52 A
5025 m³/h 7180 m³/h
(2960 cfm) (4225 cfm)
Ø 355 mm Ø 400 mm
(14.0 in.) (15.7 in.)
Ø 355 mm Ø 400 mm
(14.0 in.) (15.7 in.)
71 dB(A) 71 dB(A)
- 5°C (41°F)
- 20°C (68°F)
- 70°C (158°F)
80%
no
EN - 4